Mitsubishi GOT1000 Series Connection Manual page 901

CONNECTION TO
RKC TEMPERATURE
CONTROLLER
22.1 System Configuration. . . . . . . . . . . page 22-2
This section describes the equipment and cables needed
when connecting a GOT to a RKC temperature controller.
Select a system suitable for your application.
22.2 Connection Cable. . . . . . . . . . . . . . page 22-9
This section describes the specifications of the cables needed
when connecting a GOT to a RKC temperature controller.
Check the specifications of the connection cables.
22.3 Preparatory Procedures for Monitoring . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . page 22-16
This section provides the procedures to be followed before
performing monitoring in connection to a RKC temperature
controller.
The procedures are written on the step-by-step basis so that
even a novice GOT user can follow them to start
communications.
22.4 Temperature Controller Side Setting . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 22-32
The RKC temperature controller side settings for GOT
connection are explained.
When checking the PLC side settings, refer to this section.
22.5 Precautions . . . . . . . . . . . . . . . . . page 22-38
This section describes the precautions about temperature
controller connection.
Refer to this section without fail before starting temperature
controller connection.
22.6 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 22-39
This section describes the functions added by version upgrade
of GT Designer2 or OS.
22
22 - 1
17
18
19
20
21
22
23
24