Mitsubishi GOT1000 Series Connection Manual page 1061

2 Perform an I/O check.
Whether the CNC can communicate with the GOT or not can be checked by the I/O check function.
If this check ends successfully, it means correct communication interface settings and proper cable
connection.
Display the I/O check screen by [Main Menu]
For details on the I/O check, refer to the following manual:
GT User's Manual
All settings related to communications are complete now.
Create screens on GT Designer2 and download the project data again.
[Debug & self check] [Self check]
1 Touch [CPU] on the I/O check screen.
Touching [CPU] executes the
communication check with the
connected CNC.
2 When the communication screen
ends successfully, the screen on the
left is displayed.
27.1 Direct Connection To CPU
27.1.10 Checking for normal monitoring
25
[I/O check].
26
27
28
29
30
31
27 - 19