Mitsubishi GOT1000 Series Connection Manual page 655

(2) AB MicroLogix
Item
Transmission Speed
Sum Check Type
Adapter Address
Host Address
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 19200bps>
Specify the format in which the sum check is performed
during communication when performing sum check.
<Default: BCC>
Specify the adapter address (station No. of the PLC that the
GOT will monitor) in the connected network.
<Default: 0>
Specify the host address (station No. of the adapter to which
the GOT is connected) in the connected network.
<Default: 1>
GT User's Manual
17.3 Preparatory Procedures for Monitoring
17.3.3 Setting communication interface (Communication settings)
Range
4800bps, 9600bps,
19200bps, 38400bps
BCC, CRC16
0 to 31
1 to 31
17 - 15
17
18
19
20
21
22
23
24