Mitsubishi GOT1000 Series Connection Manual page 559

2 Communication detail settings
Item
Transmission Speed
Data Bit
Retry
Host Address
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 9600bps>
Set this item when change the data length used for communication
with the connected equipment.
<Default: 8bit>
Set the number of retries to be performed when a communication
error occurs.
When receiving no response after retries, the communication times
out.
<Default: 0 time>
Specify the host address (station No. of the PLC to which the GOT
is connected) in the network of the GOT.
<Default: 1>
GT User's Manual
14.3 Preparatory Procedures for Monitoring
14.3.3 Setting communication interface (Communication settings)
Range
4800bps, 9600bps,
19200bps, 38400bps
57600bps, 115200bps
7bit/8bit
0 to 5 times
1 to 31
14 - 27
9
10
11
12
13
14
15
16