Mitsubishi GOT1000 Series Connection Manual page 1047

2 Connector specifications
(1) GOT side connector
Use the following as the RS-232 interface and RS-232 communication unit connector on the GOT.
For the GOT side of the RS-232 cable, use a connector or connector cover applicable to the GOT
connector.
(a) Connector type
9-pin D-sub (male) inch screw fixed type
(b) Connector model
GT1595-X
GT1585-S
GT1575-S
GT1575-V
GT1575-VN
GT1572-VN
GT1565-V
GT1562-VN
GT11
GT15-RS2-9P
*1 For the confirmation method of GT15 hardware version, refer to the following manual.
GT15 User's Manual
(2) CNC side connector
Use the connector compatible with the CNC side module.
For details, refer to the following manual.
MELDAS C6/C64 CONNECTION AND MAINTENANCE MANUAL BNP-B2255
MELDAS C6/C64 NETWORK MANUAL BNP-B2372
3 Precautions when preparing a cable
The length of the RS-232 cable must be 15m or less.
Hardware
GOT
version*1
A
A
B
A
B
A
B
A
Model
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
27.1 Direct Connection To CPU
27.1.2 Connection Cable
25
26
Manufacturer
27
28
29
30
31
27 - 5