(d) Example of sequence program (FROM/TO instruction)
* Parameter setting
Module error
Module
ready
* Refresh instruction
Turn on only during 1 scan after RUN
* Data link with buffer memory parameters
Module error
Module
ready
Data link
startup
normal
completion
(buffer memory)
Data link
startup
abnormal
completion
(buffer
memory)
6 - 40
6.3 PLC Side Setting
6.3.3 Connecting to CC-Link module (A Series)
When changing the sequence program
After writing the sequence program to the PLC CPU, operate the PLC CPU ether
turning OFF and then ON or resetting.
Number of connected
modules (1 module)
Number of retry (3 times)
Number of automatic
return stations (1 station)
Operation specification in
the case of CPU failure
(Stop)
Reserved station
specification
(No specification)
Error invalid station
specification
(No specification)
Station data (Intelligent
device station, exclusive
station 1, station No. 1)
Refresh instruction
Data link startup request
(buffer memory address)
Error code reading
(SW0068)