Mitsubishi GOT1000 Series Connection Manual page 189

• Transmission speed setting (SW05 to SW07)
Set the transmission speed (SW05 to SW07) as follows.
The transmission speed setting must be consistent with that of the GOT side.
For how to set the GOT side transmission speed, refer to the following.
Section 4.3.3 Setting communication interface (Communication settings)
Setting switch
SW05
SW06
SW07
*1 Only transmission speeds available on the GOT side are shown.
(d) A1SCPUC24-R2
Transmission specifications
switch
ON
• Transmission speed setting (2 to 4)
Set the transmission speed (2 to 4) as follows.
The transmission speed setting must be consistent with that of the GOT side.
For how to set the GOT side transmission speed, refer to the following.
Section 4.3.3 Setting communication interface (Communication settings)
Setting switch
2
3
4
*2 Only transmission speeds available on the GOT side are shown.
Transmission speed
4800bps
OFF
OFF
ON
Setting
Description
switch
Write during RUN
1 enabled/disabled
setting
2
Transmission speed
3
setting
4
5 Data bit setting
6 Parity bit setting
Even/odd parity
7
setting
8 Stop bit setting
9 Sum check setting
Transmission speed
4800bps
OFF
OFF
ON
4.4.3 Connecting computer link module
*1
9600bps 19200bps
ON OFF
OFF ON
ON ON
Setting
Enabled
(Consistent with the
See descriptions
GOT side
specifications.)
8 bits
Set
Odd
1 bit
Set
*2
9600bps 19200bps
ON OFF
OFF ON
ON ON
4.4 PLC Side Setting
1
2
3
ON
4
below.
ON
ON
5
OFF
OFF
ON
6
7
8
4 - 49