Mitsubishi GOT1000 Series Connection Manual page 675

2 Communication detail settings
(1) SIEMENS S7-300/400.
Item
Transmission Speed
Adapter Address
Host Address
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Description
Set this item when change the transmission speed used for com-
munication with the connected equipment.
<Default: 38400bps>
Specify the adapter address (station No. of the PLC that the GOT
will monitor) in the connected network.
<Default: 1>
Specify the host address (station No. of the adapter to which the
GOT is connected) in the connected network.
<Default: 2>
GT User's Manual
18.3 Preparatory Procedures for Monitoring
18.3.3 Setting communication interface (Communication settings)
Range
9600bps, 19200bps,
38400bps
1 to 31
1 to 31
18 - 11
17
18
19
20
21
22
23
24