Mitsubishi GOT1000 Series Connection Manual page 971

23.4 FREQROL Series Inverter Side Settings
Inverter
FREQROL series
1 Communication settings
(1) Make the communication settings of the inverter.
Setting item
Inverter station No.
Transmission speed
Data length
Communication retry count
Communication check time interval
Waiting time setting
CR, LF Yes/No selection
Operation mode
Link start mode selection
EEPROM write selection
Frequency setting command selection
*1 Depending on target model, parameter No. to be set may differ, or no setting item may exist.
For details, refer to the manual of the inverter.
*2 Described using the example with transmission speed 19200bps, data length 7bits, stop bit 1bit and parity odd.
When communicating with other than the above setting, make sure to match each setting of the GOT and
inverter sides.
For details of the inverter, refer to the manual of each series.
Model name
S500 series (including RS485 communication function)
E500 series
A500/700 series
F500/700 series
*1
*2
*2
*2
Stop bit
*2
Parity
*1
Settings
00 to 31
19200bps
7bits
1bit
Odd
No abnormal stop
Communication check stop
0ms
CR: Provided, LF: Not provided
External operation mode at power on
Computer link
Write to RAM and EEPROM
Volume disabled
23.4 FREQROL Series Inverter Side Settings
17
18
19
20
21
22
23
24
23 - 29