Setting Communication Interface (Communication Settings) - Mitsubishi GOT1000 Series Connection Manual

27.1.6 Setting communication interface (Communication settings)

Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the driver to "A/QnA/QCPU, QJ71C24, MELDAS C6*"
3 Perform the detailed settings for the driver. (
4
Screen Design Manual
Communication detail settings)
27.1.6 Setting communication interface (Communication settings)
27.1 Direct Connection To CPU
25
26
27
28
29
30
31
27 - 9