Mitsubishi GOT1000 Series Connection Manual page 1171

MULTIPLE-GT11
CONNECTION
FUNCTION
30.1 System Configuration . . . . . . . . . page 30-2
This section describes devices and cables needed for
connection of multiple GOTs.
Refer to this section to select the desired system.
30.2 Connection Cable . . . . . . . . . . . . page 30-4
This section describes the specifications of the cables
needed for connection of multiple GOTs.
Refer to this section to check the specifications of the
connection cable to be used.
30.3 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . page 30-5
This section describes the preparatory procedures for
monitoring in multiple-GT11 connection.
The sequential checkup procedure will be helpful for those
who communicate through the GOT for the first time.
30.4 Precautions . . . . . . . . . . . . . . . . page 30-17
This section describes precautions for multiple-GT11
connection.
Refer to this section without fail before starting multiple-
GT11 connection.
30.5 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . page 30-19
This section describes the functions added by version
upgrade of GT Designer2 or OS.
30
30 - 1
25
26
27
28
29
30
31