Mitsubishi GOT1000 Series Connection Manual page 451

2 Connector specifications
(1) GOT side connector
Use the following as the RS-232 interface and RS-232 communication unit connector on the GOT.
For the GOT side of the RS-232 cable, use a connector or connector cover applicable to the GOT
connector.
(a) Connector type
9-pin D-sub (male) inch screw fixed type
(b) Connector model
GT1595-X
GT1585-S
GT1575-S
GT1575-V
GT1575-VN
GT1572-VN
GT1565-V
GT1562-VN
GT11
GT15-RS2-9P
*1 For the confirmation method of GT15 hardware version, refer to the following manual.
GT15 User's Manual
(2) SHARP PLC side connector
Use the connector compatible with the SHARP PLC side module.
For details, refer to the following manual.
User's Manual for the SHARP PLC
3 Precautions when preparing a cable
The maximum length of the RS-232 cable differs according to the specifications of the SHARP PLC.
For details, refer to the following manual.
User's Manual for the SHARP PLC
Hardware
GOT
version*1
A
A
B
A
B
A
B
A
Model
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
GM-C9RMDU11 Honda Tsushin Kogyo Co., Ltd.
17LE-23090-27(D3CC) DDK Ltd.
11.2 Connection Cable
11.2.1 RS-232 cable
9
10
Manufacturer
11
12
13
14
15
16
11 - 17