Mitsubishi GOT1000 Series Connection Manual page 518

13.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the following to the driver.
• HITACHI HIDIC H
• HITACHI HIDIC H (Protocol2)
3 Perform the detailed settings for the driver. (
13 - 14
13.3 Preparatory Procedures for Monitoring
13.3.3 Setting communication interface (Communication settings)
GT Designer2 Version Screen Design Manual
Communication detail settings)