Connecting To T3 Or T3H - Mitsubishi GOT1000 Series Connection Manual

12.4.2 Connecting to T3 or T3H

Enter the transmission parameters.
Item
*1*2
Transmission speed
Data length
Stop bit
Parity bit
Station No.
*1 Indicates only the transmission speeds that can be specified on the GOT side.
*2 Specify the transmission speed to match the baud rate of the GOT.
For how to set the baud rate of the GOT, refer to the following.
12.4.3 Connecting to model 3000 (S2/S3)
Enter the transmission parameters.
Item
Transmission method
RS485
Timeout time
*4*5
Transmission speed
Data length
Stop bit
Parity bit
Station No.
*3 Can be used as RS-422.
*4 Indicates only the transmission speeds that can be specified on the GOT side.
*5 Specify the transmission speed to match the baud rate of the GOT.
For how to set the baud rate of the GOT, refer to the following.
4800bps, 9600bps, 19200bps
7bit
2bit
Even
1
Section 12.3.3 Setting communication interface (Communication settings)
RS485
COM1
5 Sec
4800bps, 9600bps, 19200bps
7bit
2bit
Even
1
Section 12.3.3 Setting communication interface (Communication settings)
Setting
Setting
*3
12.4 PLC Side Setting
12.4.2 Connecting to T3 or T3H
9
10
11
12
13
14
15
16
12 - 27