Setting Communication Interface (Communication Settings) - Mitsubishi GOT1000 Series Connection Manual

20.3.3 Setting communication interface (Communication settings)

Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the driver to "OMRON THERMAC/INPANEL NEO".
3 Perform the detailed settings for the driver. (
Screen Design Manual
20.3 Preparatory Procedures for Monitoring
20.3.3 Setting communication interface (Communication settings)
Communication detail settings)
17
18
19
20
21
22
23
24
20 - 17