Mitsubishi GOT1000 Series Connection Manual page 975

SERVO AMPLIFIER
CONNECTION
24.1 System Configuration . . . . . . . . . page 24-2
This section describes devices and cables needed for
servo amplifier connection.
Refer to this section to select the desired system.
24.2 Connection Cable . . . . . . . . . . . . page 24-9
This section describes the specifications of the cables
needed for servo amplifier connection.
Refer to this section to check the specifications of the
connection cable to be used.
24.3 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 24-14
This section describes the preparatory procedures for the
monitoring in the servo amplifier connection.
The sequential checkup procedure will be helpful for those
who communicate through the GOT for the first time.
24.4 Setting on Servo Amplifier Side
. . . . . . . . . . . . . . . . . . . . . . . . . page 24-28
This section describes the servo amplifier setting for
connection with the GOT.
Refer to this section to check the servo amplifier setting.
24.5 Precautions . . . . . . . . . . . . . . . . page 24-33
This section describes the precautions about servo
amplifier connection.
Refer to this section without fail before starting servo
amplifier connection.
24.6 List of Functions Added by Version Upgrade
. . . . . . . . . . . . . . . . . . . . . . . . . page 24-34
This section describes the functions added by version
upgrade of GT Designer2 or OS.
24
24 - 1
17
18
19
20
21
22
23
24