Connecting To Jw-32Cuh, Jw-33Cuh Or Z-512J - Mitsubishi GOT1000 Series Connection Manual

11.4.2 Connecting to JW-32CUH, JW-33CUH or Z-512J

1 Settings for connecting to communication port 1 (PG/COMM1 port)
Set the system memory.
System memory No.
#234
#235
*1 This indicates only the transmission speeds that can be specified on the GOT side.
*2 Specify the transmission speed to match the transmission speed of the GOT.
For how to set the transmission speed of the GOT, refer to the following.
2 Settings for connecting to communication port 2 (PG/COMM2 port)
Set the system memory.
System memory No.
#236
#237
*3 This indicates only the transmission speeds that can be specified on the GOT side.
*4 Specify the transmission speed to match the transmission speed of the GOT.
For how to set the transmission speed of the GOT, refer to the following.
Item
Transmission speed, parity and
stop bit
Station No.
Section 11.3.3 Setting communication interface (Communication settings)
Item
Transmission speed, parity and
stop bit
Station No.
Section 11.3.3 Setting communication interface (Communication settings)
11.4.2 Connecting to JW-32CUH, JW-33CUH or Z-512J
Setting
D7 D6 D5 D4 D3 D2 D0
0 0 (3) (2) (1)
*1 *2
(1) Transmission speed
000: 19200bps
001: 9600bps
010: 4800bps
(2) Parity
10 (fixed): Even
(3) Stop bit
1 (fixed): 2 bits
1: Station No. 1 (fixed)
Setting
D7 D6 D5 D4 D3 D2 D0
0 0 (3) (2) (1)
*3 *4
(1) Transmission speed
000: 19200bps
001: 9600bps
010: 4800bps
(2) Parity
10 (fixed): Even
(3) Stop bit
1 (fixed): 2 bits
1: Station No. 1 (fixed)
11.4 PLC Side Setting
9
10
11
12
13
14
15
16
11 - 37