Mitsubishi GOT1000 Series Connection Manual page 768

(6) Set clock data (TS) command
The following shows an example of setting the clock data of GOT.
(Assuming the clock data of GOT is to be set to "2004, June 1, 18:46:49 Tuesday".)
Item
STX
Request message
02
H
(host GOT)
Response
message during
normal
communication
(GOT host)
(format 1: GOT-A900 series microcomputer connection (format 1))
Response
message during
(format 2: GOT-A900 series microcomputer connection (format 2))
faulty
communication
(GOT host)
19 - 38
19.5 Message Formats
19.5.3 Formats 1, 2 (GOT-A900 series microcomputer connection)
After execution
Command Year data Month data
T S 0 4 0 6
54 53 30 34 30 36
H H H H H
(H) (L) (H) (L) (H) (L)
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data
will differ from the time displayed on the utility.
Example: When June 1, 2004 (Thursday) is set by the clock data setting
command(the actual day of week is Tuesday), Tuesday (TUE) will be
displayed on the utility time display.
Time display
2004/06/01 18:46:49
Message format
Day data Hour data Minute data
0 1 1 8 4
30 31 31 38 34
H H H H H H
(H) (L) (H) (L) (H)
Sum check is performed in this range.
ACK
06
H
NAK
15
H
Error
NAK
code
15 06
H H
The above is a case where
the sum check error (06 )
H
has occurred.
TUE
Second Day-of-
ETX
data week data
6 4 9 0 2
36 34 39 30 32 03
H H H H H
(L) (H) (L) (H) (L)
Sum
Check
7 7
37 37
H H H
(H) (L)