Connecting To Motion Controller Cpu (Q Series) - Mitsubishi GOT1000 Series Connection Manual

7.1.2

Connecting to motion controller CPU (Q Series)

A motion controller CPU (Q Series) mounted to the multiple CPU system of the QCPU (Q mode) can be
monitored.
The system configuration, connection conditions and system equipment when connecting the GOT to a
motion controller CPU (Q Series) are the same as the case of the QCPU (Q mode).
( Section 7.1.1 Connecting to QCPU (Q mode))
7 - 4
7.1 System Configuration
7.1.2 Connecting to motion controller CPU (Q Series)
Communication driver
CC-Link (G4)