Mitsubishi GOT1000 Series Connection Manual page 321

2 Confirming the communication state of GOT
(1) When using the Command Prompt of Windows
Execute a Ping command at the Command Prompt of Windows .
(a) When normal communication
C:\>Ping 192.168.0.18
Reply from 192.168.0.18: bytes=32 time<1ms TTL=64
(b) When abnormal communication
C:\>Ping 192.168.0.18
Request timed out.
(2) When using the "PING Test" of GT Designer2
Select [Communication]
"PING Test".
(3) When abnormal communication
At abnormal communication, check the followings and execute the Ping command again.
• Mounting condition of Ethernet communication unit
• Cable connecting condition
• Confirmation of "Communication settings"
• IP address of GOT svpecified by Ping command
Ethernet diagnostics of GX Developer
Ethernet diagnostics of GX Developer is available to a Ping test from the PLC.
For details of Ethernet diagnostics of GX Developer, refer to the following manual.
[Communication configuration]
User's Manual of the Ethernet module
8.2 Preparatory Procedures for Monitoring
8.2.7 Checking for normal monitoring
"Ethernet" and
1 Specify the "GOT IP address" of the
"PING Test" and click on the
button.
2 The "Test Result" is displayed after the
"PING Test" is finished.
to display
Test
PING Test
8 - 17
1
2
3
4
5
6
7
8