Mitsubishi GOT1000 Series Connection Manual page 275

(2) Program condition (for FROM/TO instruction)
This program writes parameters to the buffer memory when PLC CPU status changes from STOP
to RUN and automatically starts the data link with FROM/TO instruction.
(a) I/O signal of CC-Link module
Control & Communication Link System Master/Local Module Type AJ61BT11/
A1SJ61BT11 User's Manual
(b) Devices used by user
Device
M100, M101
M102, M103
D0
D1
D2
D3
D4
D5
D6
D400
(c) Buffer memory settings used in the present example
Buffer memory address
Decimal (Hexadecimal)
1 (1 )
H
2 (2 )
H
3 (3 )
H
6 (6 )
H
16 (10 )
H
20 (14 )
H
32 (20 )
H
*1 Details for the station data are shown below.
For 1) and 2), set according to the station number setting switch of the CC-Link communication unit and condition
setting switches (SW2).
For 3), the setting is fixed.
b15 to
3)
1) Station No. (set it according to the station number setting switch.)
01 to 40 : Station No. 1 to Station No. 64
H H
2) Number of stations occupied (set it according to the condition setting switches (SW2).)
1 : Exclusive station 1
H
2 : Exclusive station 2
H
3 : Exclusive station 3
H
4 : Exclusive station 4
H
3) Station type (2
0 : Remote I/O station
H
1 : Remote device station
H
2 : Intelligent device station (Incl. local station)
H
Flag for parameter setting
Flag for data link startup
Number of connected modules
Number of retry
No. of automatic return stations
Operation specification in the case of CPU failure
Reserved station specification (Station No. 1 to Station No. 16)
Error invalid station specification (Station No. 1 to Station No. 16)
Station data (first module)
Error code in the case of data link startup failure
Number of connected modules
Number of retry
Number of automatic return stations
Operation specification in the case of CPU failure
Reserved station specification (Station No. 1 to Station No. 16)
Error invalid station specification (Station No. 1 to Station No. 16)
Station data (first module)
b12 b11 to b8 b7
2)
: Set it to intelligent device station.)
H
6.3.3 Connecting to CC-Link module (A Series)
Application
Item
*1
to b0
1)
6.3 PLC Side Setting
1
2
3
4
5
Setting
1 (1 module)
3 (3 times)
1 (1 station)
0 (stop)
6
0 (No specification)
0 (No specification)
2101
H
7
8
6 - 39