Precautions - Mitsubishi GOT1000 Series Connection Manual

27.2.11 Precautions

1 Network configuration
Use MELSECNET/10 (PLC to PLC network) to configure a network including the GOT.
The following networks including the GOT cannot be configured.
• MELSECNET/10 (Remote I/O network)
• MELSECNET/H (PLC to PLC network: MELSECNET/H Mode, MELSECNET/H Extended Mode)
• MELSECNET/H (Remote I/O network)
2 Monitoring range
Only CNC of the same networks No. can be monitored in GOT.
For details, refer to the following manual.
GT Designer2 Version
3 Version of CNC
For MELDAS C6/C64, use NC system software version E0 or later.
Screen Design Manual
27.2 MELSECNET/10 Connection (PLC To PLC Network)
27.2.11 Precautions
25
26
27
28
29
30
31
27 - 41