When changing communication interface setting by Utility
The communication interface setting can be changed by the Utility.
For details on the Utility, refer to the following manual.
GT
User's Manual
7.2.6 Verifying GOT recognizes connected equipment
2
The [Communication setting] appears.
3
Verify that the following communication
driver name is displayed in the box for the
communication interface to be used.
• Communication driver: CC-Link(G4)
4
When the communication driver name is
not displayed normally, carry out the
following procedure again.
•
Section 7.2 Preparatory
Procedures for Monitoring
7.2 Preparatory Procedures for Monitoring
1
2
3
4
5
6
7
8
7 - 15