List Of Functions Added By Version Upgrade - Mitsubishi GOT1000 Series Connection Manual

CONNECTION TO
OMRON
TEMPERATURE
CONTROLLER
20.1 System configuration . . . . . . . . . . . page 20-2
This section describes the equipment and cables needed
when connecting a GOT to a OMRON temperature controller.
Select a system suitable for your application.
20.2 Connection Cable. . . . . . . . . . . . . . page 20-8
This section describes the specifications of the cables needed
when connecting a GOT to a OMRON temperature controller.
Check the specifications of the connection cables.
20.3 Preparatory Procedures for Monitoring
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 20-14
This section provides the procedures to be followed before
performing monitoring in connection to a OMRON temperature
controller. The procedures are written on the step-by-step
basis so that even a novice GOT user can follow them to start
communications.
20.4 Temperature Controller Side Setting
. . . . . . . . . . . . . . . . . . . . . . . . . . . page 20-28
The OMRON temperature controller side settings for GOT
connection are explained. When checking the PLC side
settings, refer to this section.
20.5 Precautions . . . . . . . . . . . . . . . . . page 20-32
This section describes the precautions about temperature
controller connection. Refer to this section without fail before
starting temperature controller connection.

20.6 List of Functions Added by Version Upgrade

. . . . . . . . . . . . . . . . . . . . . . . . . . page 20-33
This section describes the functions added by version
upgrade of GT Designer2 or OS.
20
20 - 1
17
18
19
20
21
22
23
24