Mitsubishi GOT1000 Series Connection Manual page 269

6.3.3 Connecting to CC-Link module (A Series)
This section describes the settings of the GOT and CC-Link module (A Series) in the case of system
configuration shown as
CC-Link module (A Series)
1 System configuration
<CC-Link module> *1 (Use the default value for settings other than the following.)
Station type : Master sration
Station No. : Station No.0
Mode setting : Remote net mode
All connect count : 1
Transmission speed : 156kbps
Module mode : Intelligent mode
Switch settings of CC-Link module (A Series)
Sequence program
*1 The CC-Link module is mounted on the base unit slot 0.
The Start I/O No. of the CC-Link module is set to "0"
.
For details of the CC-Link module (A Series), refer to the following manual.
Control & Communication Link System Master/Local Module Type
AJ61BT11/A1SJ61BT11 User's Manual
[Communication Settings] of GT Designer2
Setting of the CC-Link communication unit
6.3.3 Connecting to CC-Link module (A Series)
<GOT> (Use the default value for settings other than the following.)
Station type : Intelligent device station
Station No. : Station No.1
Number of station occupied : Exclusive station 1
Transmission : 156kbps
speed
6.3 PLC Side Setting
1
2
3
4
5
6
7
8
6 - 33