Mitsubishi GOT1000 Series Connection Manual page 606

16.1 System Configuration
Select a system configuration suitable for your application.
16.1.1 Connecting to FA-M3
1 System configuration and connection conditions
Connection conditions
No. of GOTs Distance
15m or less
15m or less
1
1200m or less
*1 This includes the length of the CPU port/D-Sub 9-pin conversion cable.
16 - 2
16.1 System Configuration
16.1.1 Connecting to FA-M3
Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Use these numbers as references when confirming models and applications.
(1) When the CPU port/D-Sub 9-pin conversion cable is used for connection to the
programming tool connector, the GOT cannot be connected to the following PLCs.
F3SP10, F3SP20, F3SP30, F3SP36
(2) Since the F3SP10 is not compatible with the PC link module (F3LC11-2N), RS-
422 connection is not available for it.
5
CPU port/D-Sub 9-pin conversion cable
3
PC link module
7
4
PC link module
System configuration and connection conditions correspond
) of System equipment.
System configuration
6
RS-232 cable 1)
*1
MAX15m
RS-232 cable 2)
1
MAX15m
8
RS-422 cable 1)
MAX1200m
Communication driver
YOKOGAWA FA500/FA-M3
1
2