Mitsubishi GOT1000 Series Connection Manual page 984

2 Connector specifications
(1) GOT side connector
Use the following as the RS-232 interface and RS-232 communication unit connector on the GOT.
For the GOT side of the RS-232 cable, use a connector or connector cover applicable to the GOT
connector.
(a) Connector type
9-pin D-sub (male) inch screw fixed type
(b) Connector model
GT1595-X
GT1585-S
GT1575-S
GT1575-V
GT1575-VN
GT1572-VN
GT1565-V
GT1562-VN
GT11
GT15-RS2-9P
*1 For the confirmation method of GT15 hardware version, refer to the following manual.
(2) Servo amplifier side connector
Use the connector compatible with the servo amplifier.
For details, refer to the following manual.
See the technical data of the servo amplifier to be used.
3 Precautions when preparing a cable
• Use a shielded multi-core cable and connect the shield to the FG terminal securely.
• The length of the RS-232 cable must be within 15m.
However, for use at the transmission speed of 38400bps or higher, the length must be within 3m.
24 - 10
24.2 Connection Cable
24.2.1 RS-232 cable
Hardware
GOT
version*1
GT15 User's Manual
Model
A 17LE-23090-27(D3CC)
A GM-C9RMDU11
B 17LE-23090-27(D3CC)
A GM-C9RMDU11
B 17LE-23090-27(D3CC)
A GM-C9RMDU11
B
A
17LE-23090-27(D3CC)
Manufacturer
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.