6.2.3
Setting communication interface (Communication settings)
To set the communication interface of the GOT, use the [Communication settings] of GT Designer2 and the
switches of the communication unit.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication Settings] of GT Designer2, refer to the following manual.
GT Designer2 Version
1
Communication Settings
1
Set "1" to the channel No. used.
2
Set the driver to "CC-Link (ID)".
3
Perform the detailed settings for the driver. (
Screen Design Manual
Communication detail settings)
6.2 Preparatory Procedures for Monitoring
6.2.3 Setting communication interface (Communication settings)
1
2
3
4
5
6
7
8
6 - 7