Item
Set the delay time for reducing the load of the network/destination
Delay Time
PLC.
<Default: 0ms>
*1
To connect the GOT with the Ethernet module (Q Series) in the one-on-one relationship using a cross cable, set
[Timeout Time] to 6 sec. or longer.
Example of communication detail settings
For examples of communication detail settings, refer to the following.
Description
Section 8.3 PLC Side Setting
8.2 Preparatory Procedures for Monitoring
8.2.3 Setting communication interface (Communication settings)
(from previous page)
Range
0 to 10000 ( 10 ms)
8 - 9
1
2
3
4
5
6
7
8