Connecting To H-200 To 252 Series, H Series Board Type Or Eh-150 Series - Mitsubishi GOT1000 Series Connection Manual

13.1.2 Connecting to H-200 to 252 series, H series board type or EH-150
series
1 System configuration and connection conditions
Connection conditions
Number of
Distance
GOTs
1 15m or less
*1 To use "transmission control procedure 2" as a protocol, select "HITACHI HIDIC H (Protocol2)" as a
communication driver.
*2 To connect to H-200 to 252 series, connect to the peripheral port of the CPU module.
*3 To connect to the EH-150 series, connect to the serial port of the CPU module.The module jack (8 pins)/D-sub
connector (15 pins) conversion cable (EH-RS05 made by Hitachi Industrial Equipment Systems Co., Ltd.) is
necessary.
*4 To connect to serial port 2 of H-252C (CPU22-02HC, CPE22-02HC), the round connector (8 pins)/D-sub
connector (15 pins) conversion cable (CNCOM-05 made by Hitachi Industrial Equipment Systems Co., Ltd.) is
necessary.
2 System equipment
(1) GOT
Image No.
RS-232
RS-232 interface
• For RS-232 communication
RS-232 RS-232
RS-232 Communication Unit
• For RS-232 communication
(2)
(3) Cable
Image No.
RS-232 cable 1)
• Between CPU and GOT
RS-232 cable 2)
• Between CPU and GOT
*1 The RS-232 cable can be prepared by the user.(
*2 The connection diagram of the cable to be used varies according to the specified transmission speed.
(

13.1.2 Connecting to H-200 to 252 series, H series board type or EH-150 series

*2
2
*3
*4
Name
(Built into GOT)
GT15-RS2-9P
Name
*1*2
GT09-C30R20401-15P(3m)
*1*2
GT09-C30R20402-15P(3m)
Section 13.2 Connection Cable)
*1
System configuration
RS-232 cable 1), 2)
1
MAX15m
Model name
Model name
Section 13.2 Connection Cable)
13.1 System Configuration
9
Communication driver
· HITACHI HIDIC H
10
· HITACHI HIDIC H (Protocol2)
11
12
13
14
15
16
13 - 5