Temperature Controller Side Setting - Mitsubishi GOT1000 Series Connection Manual

21.4 Temperature Controller Side Setting

Temperature controller
Interface converter
21.4.1 Connecting to DMC10
1 Communication settings
Make the communication settings by operating the Smart Loader Package (SLP-D10) of the
temperature controller.
Setting items
*1
Transmission speed
*2
Communication mode
Data length
*1
Parity bit
Stop bit
Communication minimum response time
*3*4
Station address
*1 Set the transmission speed according to the GOT side.
*2 Set to CPL.
*3 Do not set to "0".
*4 Select the station address without overlapping with that of other units.
2 Station address setting
Set the station address using the rotary switch for the station address.
Rotary switch for the station address
21 - 38
21.4 Temperature Controller Side Setting
21.4.1 Connecting to DMC10
(1) YAMATAKE temperature controller
For details of YAMATAKE temperature controller, refer to the following manual.
User's Manual for the YAMATAKE temperature controller
Model name
DMC10
SDC15, SDC25/26, SDC35/36
SDC20/21
SDC30/31
SDC40A/40B/40G
CMC10L
9600bps, 19200bps
CPL
8 bits
Even, none
2 bits
1ms, 10ms, 100ms, 200ms
0 to F
Set value
Front of the temperature
controller body
Reference
Section 21.4.1
Section 21.4.3
Section 21.4.4
Section 21.4.4
Section 21.4.2
Section 21.4.5