(b) In the case of the GT11
9 - 32
9.3 Preparatory Procedures for Monitoring
9.3.5 Attaching communication unit and connecting cable
When using the RS-422 conversion unit
On "Communication settings" on the utility, make setting so that 5V DC power is
supplied to the RS-422 conversion unit from the RS-232 interface on the GOT.
For details on the utility, refer to the following manual:
GT
User's Manual
1
Touch [5V supply].
2
Set [5V power supply] to "YES".
1
Connect the RS-422 cable to the RS-422
interface on the GOT.