Mitsubishi GOT1000 Series Connection Manual page 371

2 Communication detail settings
Item
Transmission Speed
Host Address
Delay Time
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Description
Set this item when change the transmission speed used for com-
munication with the connected equipment.
<Default: 19200bps>
Specify the host address (station No. of the PLC to which the GOT
is connected) in the network of the GOT.
<Default: 0>
Set this item to adjust the transmission timing of the
communication request from the GOT.
<Default: 0>
GT User's Manual
9.3 Preparatory Procedures for Monitoring
9.3.3 Setting communication interface (Communication settings)
Range
4800bps, 9600bps,
19200bps, 38400bps,
57600bps, 115200bps
0 to 31
0 to 300 ms
9 - 27
9
10
11
12
13
14
15
16