Mitsubishi GOT1000 Series Connection Manual page 571

CONNECTION TO
YASKAWA PLC
15.1 System Configuration . . . . . . . . . page 15-2
This section describes the equipment and cables needed
when connecting a GOT to a YASKAWA PLC.
Select a system suitable for your application.
15.2 Connection Cable . . . . . . . . . . . page 15-12
This section describes the specifications of the cables
needed when connecting a GOT to a YASKAWA PLC.
Check the specifications of the connection cables.
15.3 Preparatory Procedure for Monitoring . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 15-18
This section provides the procedures to be followed before
performing monitoring in connection to a YASKAWA PLC.
The procedures are written on the step-by-step basis so
that even a novice GOT user can follow them to start
communications.
15.4 PLC Side Setting . . . . . . . . . . . . page 15-33
The PLC side settings for GOT connection are explained.
When checking the PLC side settings, refer to this section.
15
15 - 1
9
10
11
12
13
14
15
16