4
[Communication Settings] of GT Designer2
Retry
Timeout Time
5
Setting of the CC-Link communication unit
Mode setting switch
Station number setting switch
Transmission baudrate setting switch
SW1 (Input data status of the data link error
Condition
station)
setting
switches
SW2 (Number of occupied stations)
6 - 32
6.3 PLC Side Setting
6.3.2 Connecting to CC-Link module (QnA Series)
Item
[Communication Settings] of GT Designer2
For the setting method of [Communication Settings] of GT Designer2, refer to the
following.
Section 6.2.3 Setting communication interface (Communication settings)
Item
Setting of the CC-Link communication unit
For the setting method of the CC-Link communication unit, refer to the following.
Section 6.2.3 Setting communication interface (Communication settings)
Setting (Use default value.)
3 Times
3 Sec
Setting
0: Online (fixed)
1: Station No.1
0: 156kbps
OFF: Cleared
OFF: 1 station