Mitsubishi GOT1000 Series Connection Manual page 991

24.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the driver to "MELSERVO-J3, J2S/M".
3 Perform the detailed settings for the driver. (
Screen Design Manual
24.3 Preparatory Procedures for Monitoring
24.3.3 Setting communication interface (Communication settings)
Communication detail settings)
17
18
19
20
21
22
23
24
24 - 17