Mitsubishi GOT1000 Series Connection Manual page 857

CONNECTION TO
YAMATAKE
TEMPERATURE
CONTROLLER
21.1 System Configuration. . . . . . . . . . . page 21-2
This section describes the equipment and cables needed
when connecting a GOT to a YAMATAKE temperature
controller.
Select a system suitable for your application.
21.2 Connection Cable. . . . . . . . . . . . . page 21-18
This section describes the specifications of the cables needed
when connecting a GOT to a
controller.
Check the specifications of the connection cables.
21.3 Preparatory Procedures for Monitoring . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . page 21-24
This section provides the procedures to be followed before
performing monitoring in connection to a
temperature controller.
The procedures are written on the step-by-step basis so that
even a novice GOT user can follow them to start
communications.
21.4 Temperature Controller Side Setting . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 21-38
The YAMATAKE temperature controller side settings for GOT
connection are explained.
When checking the PLC side settings, refer to this section.
21.5 Precautions . . . . . . . . . . . . . . . . . page 21-43
This section describes the precautions about temperature
controller connection.
Refer ti this section without fail before starting temperature
controller connection.
21.6 List of Functions Added by Version Upgrade .
. . . . . . . . . . . . . . . . . . . . . . . . . page 21-44
This section describes the functions added by version upgrade
of GT Designer2 or OS.
YAMATAKE temperature
YAMATAKE
21
21 - 1
17
18
19
20
21
22
23
24