Item
Set the time period for a communication to time out.
*1
Timeout Time
<Default: 3 Sec>
Set the delay time for reducing the load of the network/destination
Delay Time
PLC.
<Default: 0ms>
*1
To connect the GOT with the Ethernet module (Q Series) in the one-on-one relationship using a cross cable, set
[Timeout Time] to 6 sec. or longer.
Example of communication detail settings
For examples of communication detail settings, refer to the following.
Description
Section 27.4.10 CNC Side Settings
27.4.5 Setting communication interface (Communication settings)
(from previous page)
Range
3 to 90 Sec
0 to 10000 ( 10 ms)
27.4 Ethernet Connection
25
26
27
28
29
30
31
27 - 69