Mitsubishi GOT1000 Series Connection Manual page 234

4 [Communication settings] of GT Designer2
Retry
Timeout Time
5 Setting of the MELSECNET/10 communication unit
Network number setting switch
Group number setting switch
Station number setting switch
Mode setting switch
5 - 42
5.3 PLC Side Setting
5.3.3 Connecting to MELSECNET/10 network module (A Series)
Item
[Communication Settings] of GT Designer2
For the setting method of [Communication Settings] of GT Designer2, refer to the
following.
Section 5.2.3 Setting communication interface (Communication settings)
Item
Setting of the MELSECNET/10 communication unit
For the setting method of the MELSECNET/10 communication unit, refer to the
following.
Section 5.2.3 Setting communication interface (Communication settings)
Setting (Use default value.)
3 Times
3 Sec
Setting
1: Network No.1
0: No group setting (fixed)
2: Station number 2
0: On-line (fixed)