Mitsubishi GOT1000 Series Connection Manual page 366

2 Connector specifications
(1) GOT side connector
Use the following as the RS-422 interface and RS-422/485 communication unit connector on the
GOT.
For the GOT side of the RS-422 cable, use a connector and connector cover applicable to the GOT
connector.
(a) Connector type
9-pin D-sub (female)
(b) Connector model
RS-422 conversion unit 17LE-13090-27(D2AC)
GT11
GT15-RS4-9S
(2) OMRON PLC side connector
Use the connector compatible with the OMRON PLC side module.
For details, refer to the following manual.
3 Precautions when preparing a cable
The length of the RS-422 cable must be 200m or less.
4 Connecting the terminator
When connecting an OMRON PLC to a GOT, a terminating resistor must be set to the OMRON PLC.
No terminating resistor needs to be connected on the GOT side as one is already built into the GOT.
9 - 22
9.2 Connection Cable
9.2.2 RS-422 cable
GOT
17LE-13090-27(D3AC)
17LE-13090-27(D3AC)
User's Manual for the OMRON PLC
Section 9.4 PLC Side Setting
Model
DDK Ltd.
DDK Ltd.
DDK Ltd.
Manufacturer