Preparatory Procedure For Accessing - Mitsubishi GOT1000 Series Connection Manual

29.4 Preparatory Procedure for Accessing

The following shows the procedures to be followed before accessing and corresponding reference sections.
Connect the GOT to a Mitsubishi PLC.
Set the communication interface.
(Communication settings)
Attach the communication unit and connect the cable.
Make sure that the GOT recognizes the connected
equipment.
As necessary, access the PLC and inverter by the
following softwares.
• GX Developer
• FR Configurator
Chapter 2 BUS CONNECTION
Chapter 3 DIRECT CONNECTION TO CPU
Chapter 23 INVERTER CONNECTION
Section 29.4.1
Setting communication interface
(Communication settings)
Section 29.4.2
Attaching the communication unit and
connecting the cable
Section 29.4.3
Verifying GOT recognizes connected equipment
Section 29.4.4
Accessing the PLC by the GX Developer
Section 29.4.5
Accessing the inverter by the FR Configurator
29.4 Preparatory Procedure for Accessing
25
26
27
28
29
30
31
29 - 9