12.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1
Communication settings
1
Set "1" to the channel No. used.
2
Set the driver to "TOSHIBA PROSEC T/V".
3
Perform the detailed settings for the driver. (
Screen Design Manual
12.3 Preparatory Procedures for Monitoring
12.3.3 Setting communication interface (Communication settings)
Communication detail settings)
9
10
11
12
13
14
15
16
12 - 15