Connection Cable - Mitsubishi GOT1000 Series Connection Manual

27.1.2 Connection Cable

The RS-232 cable used for connecting the GOT to the PLC should be prepared by the user.
The following provides connection diagrams for each cable, connector specifications and other information.
CNC MELDAS C6/C64
1 Connection diagram
(1) RS-232 cable 1)
GOT side
Signal name Pin No.
CD 1
RD(RXD) 2
SD(TXD) 3
ER(DTR) 4
SG 5
DR(DSR) 6
RS(RTS) 7
CS(CTS) 8
9
*1
27 - 4
27.1 Direct Connection To CPU
27.1.2 Connection Cable
Model name
Cable connection and signal direction
For details of the CNC side connection, refer to the following manual.
MELDAS C6/C64 CONNECTION AND MAINTENANCE MANUAL BNP-B2255
MELDAS C6/C64 NETWORK MANUAL BNP-B2372
Connection cable
RS-232 cable
RS-232 cable
*1
CNC
Pin No. Signal name
1 GND
6 SD
11 GND
16 RD
18 ER(DTR)