Mitsubishi GOT1000 Series Connection Manual page 943

INVERTER
CONNECTION
23.1 System Configuration . . . . . . . . . page 23-2
This section describes the equipment and cables needed
when connecting a GOT to a FREQOL SERIES
INVERTER. Select a system suitable for your application.
23.2 Connection Cable . . . . . . . . . . . . page 23-9
This section describes the specifications of the cables
needed when connecting a GOT to a FREQOL SERIES
INVERTER. Check the specifications of the connection
cables.
23.3 Preparatory Procedures for Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 23-15
This section provides the procedures to be followed before
performing monitoring in connection to a FREQOL SERIES
INVERTER. The procedures are written on the step-by-
step basis so that even a novice GOT user can follow them
to start communications.
23.4 FREQROL Series Inverter Side Settings . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 23-29
The FREQOL SERIES INVERTER side settings for GOT
connection are explained. When checking the PLC side
settings, refer to this section.
23.5 Precautions . . . . . . . . . . . . . . . page 23-31
This section describes the precautions about FREQROL
SERIES INVERTER connection. Refer to this section
without fail before starting servo FREQROL SERIES
INVERTER.
23.6 List of Functions Added by Version Upgrade. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . page 23-32
This section describes the functions added by version
upgrade of GT Designer2 or OS.
23
23 - 1
17
18
19
20
21
22
23
24