Mitsubishi GOT1000 Series Connection Manual page 919

22.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the driver to "RKC SR Mini HG(MODBUS)".
3 Perform the detailed settings for the driver. (
Screen Design Manual
22.3 Preparatory Procedures for Monitoring
22.3.3 Setting communication interface (Communication settings)
Communication detail settings)
17
18
19
20
21
22
23
24
22 - 19