Mitsubishi GOT1000 Series Connection Manual page 191

When connecting the GT11 and the computer link unit
When the GT11 and the computer link unit are connected via RS-232C, set the
buffer memory in the computer link unit using the sequence program so that CD
signals are not checked.
Examples of the CPU units equipped with built-in computer link are explained
below also.
(1) In the case of A computer link
Refer to the program example below in which the I/O signals of the computer link
unit are 80 to 9F (H).
X87
10B(H):CD terminal will be checked
(2) In the case of CPU equipped with built-in computer link
(a) A1SCPUC24-R2
X0E7
10B(H):CD terminal will be checked
Fixed values
(b) A2CCPUC2
X1E7
10B(H):CD terminal will be checked
Fixed values
Write to buffer memory
Computer link unit connection point
TO P H8 H10B
K1:CD terminal will not be checked
Write to buffer memory
Computer link unit connection point
(Fixed values)
TO P H0E
K1:CD terminal will be checked
Write to buffer memory
Computer link unit connection point
(Fixed values)
TO P H1E
K1:CD terminal will not be checked
4.4 PLC Side Setting
4.4.3 Connecting computer link module
K1 K1
H10B K1 K1
H10B K1 K1
4 - 51
1
2
3
4
5
6
7
8