Mitsubishi GOT1000 Series Connection Manual page 1030

26.1 System Configuration
Select a system configuration suitable for your application.
1 System configuration and connection conditions
Connection conditions
Number of
Distance
GOT
Varies
according to
1
the printer's
specifications.
*1 The PLC connection type and communication interface for printer connection are shown below.
Remark
26 - 2
26.1 System Configuration
Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Use these numbers as references when confirming models and applications.
*1
Connect to the PLC.
Varies according to the
connection type.
GOT type
Connection type
Bus connection
Ethernet connection
Direct CPU connection
Computer link connection
Third party PLC connection
System configuration between GOT and PLC
For the system configuration between the GOT and PLC, refer to the
corresponding section.
• MITSUBISHI PLC CONNECTIONS (
• THIRD PARTY PLC CONNECTIONS (
System configuration and connection conditions correspond
) of System equipment.
System Configuration
3
USB cable
1
MAX3m
PLC GOT
Communication interface of
GOT
Bus connection unit
Ethernet communication unit
RS-232 communication unit
RS-422/485 communication unit
(Model:GT15-RS4-9S only)
Communication driver
Extended function OS
Connection type
Printer
dependent
2
Printer
GOT printer
Communication interface of
GOT
RS-232 interface
Sections 2 to 8)
Sections 9 to 18)