Verifying Got Recognizes Connected Equipment - Mitsubishi GOT1000 Series Connection Manual

21.3.6 Verifying GOT recognizes connected equipment

Verify the GOT recognizes connected equipments on [Communication setting] of the Utility.
• Channel number of communication interface, communication drivers allocation status
• Communication unit installation status
Remark
When using GT1585-S, GT1575-S,
GT1575-V, GT1575-VN, GT1572-VN,
GT1565-V, GT1562-VN or GT11
21 - 34
21.3 Preparatory Procedures for Monitoring
21.3.6 Verifying GOT recognizes connected equipment
How to display Utility(at default),
1-point press on GOT screen upper-left corner
When using GT1595-X
When setting the utility call key to 1-point
When setting "Pressing Time" to other than 0 second on the setting screen of the
utility call key, press and hold the utility call key until the buzzer sounds.
For the setting of the utility call key, refer to the following.
GT15 User's Manual
utility call key
utility call key
Simultaneous 2-point press
Utility display
(When using GT15)