Mitsubishi GOT1000 Series Connection Manual page 621

2
Communication detail settings
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Sum check
Retry
Timeout Time
Delay Time
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 9600bps>
Set this item when change the data length used for commu-
nication with the connected equipment.
<Default: 8 bits>
Specify the stop bit length for communications.
<Default: 1 bit>
Specify whether or not to perform a parity check, and how it
is performed during communication.
<Default: None>
Set whether or not to perform a sum check during communi-
cation.
<Default: Done>
Set the number of retries to be performed when a communi-
cation error occurs.
When receiving no response after retries, the communica-
tion times out.
<Default: 0 times>
Set the time period for a communication to time out.
<Default: 3 seconds>
Set this item to adjust the transmission timing of the com-
munication request from the GOT.
<Default: 0ms>
16.3 Preparatory Procedure for Monitoring
16.3.3 Setting communication interface (Communication settings)
Range
4800bps, 9600bps, 19200bps,
38400bps, 57600bps,
115200bps
7 bits or 8 bits
1 bit or 2bits
None
Even
Odd
Done, None
0 to 5 times
3 to 30 seconds
0 to 30 (x 10 ms)
16 - 17
9
10
11
12
13
14
15
16