Mitsubishi GOT1000 Series Connection Manual page 506

13.1 System Configuration
Select a system configuration suitable for your application.
13.1.1 Connecting to large-sized H series
1 System configuration and connection conditions
Connection conditions
Number of
Distance
GOTs
15m or less
1
200m or less
*1 To use "transmission control procedure 2" as a protocol, select "HITACHI HIDIC H (Protocol2)" as a
communication driver.
*2 To connect to the large-sized H series, connect to the peripheral port of the CPU module.
13 - 2
13.1 System Configuration
13.1.1 Connecting to large-sized H series
Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Use these numbers as references when confirming models and applications.
*2
3
System configuration and connection conditions correspond
) of System equipment.
System configuration
4
RS-232 cable 1), 2)
MAX15m
3
Intelligent serial port module
5
RS-232 cable 1)
MAX15m
Intelligent serial port module
6 RS-422 cable
MAX200m
Communication driver
· HITACHI HIDIC H
· HITACHI HIDIC H (Protocol2)
*1
1
1
2